SiTime timing solutions – The heartbeat of 5G™
5G communications infrastructure is creating a denser network, closer to the consumer and in less controlled environments. With shorter-range radios, higher frequencies, and tighter channels, there is an even greater demand on the timing solution. SiTime keeps everything in sync with greater dynamic stability. Our MEMS timing solutions deliver the performance needed to keep networks running, even under the most demanding conditions like extreme temperatures, rapid airflow, shock, vibration, and electromagnetic interference.
Ultra-stable performance
Frequency stability as good at ±5 ppb
-40°C to 105°C operating temperature
±0.2 ppb daily aging
Environmentally resilient
±0.3 ppb/°C, 10°C/min frequency slope (ΔF/ΔT)
1.5e-11 ADEV, 10s averaging time
0.2 ps/mV PSNR
Higher reliability and quality
>2.2 billion-hour MTBF; <0.5 FIT rate
<1 DPPM quality
50x better than quartz
Explore Applications
Distributed Units
Serial-data Links
Timing Servers
Featured Products
• 1 MHz to 220 MHz, ±5 to ±20 ppb
• Better dynamic stability with ±0.3 ppb/°C frequency slope (ΔF/ΔT)
• -40°C to +105°C temperature operation
• Resilient to rapid temp change, airflow and vibration
• 1 MHz to 60 MHz, ±5 to ±50 ppb, up to +105°C temp operation
• No activity dips or micro-jumps
• Smallest 9 x 7 mm OCXO package
• Ease to use, no cover or restrictions on PCB placement
• 1 MHz to 725 MHz, ±10 to ±20 ppm
• -40 to +105°C temperature operation
• 0.02 ps/mv PSNR, I2C/SPI programmable
• Industry-standard packages as small as 2.0 x 1.6 mm
• 4 inputs, up to 11 outputs, 8 kHz to 2.1 GHz outputs
• On-chip MEMS resonator, eliminates external clock
• No quality and reliability issues associated with quartz clocks
• 10x more resistant to vibration and board bending
• 1 to 4 PLLs, 4-inputs, up to 11 outputs, 8 kHz to 2.1 GHz outputs
• 26 ps phase build-out (hitless switching)
• Low wander mode, zero-delay buffer mode
• DCO with 50-ppt resolution